The Gold Standard of
Metal Roofing.
Concealed fasteners. Continuous panels. Zero exposed screws. Standing seam is the most watertight, durable, and architecturally refined metal roofing system available — and VAH Construction are the specialists.
What Makes Standing Seam Different.
Standing seam panels run continuously from the ridge of your roof to the eave — no horizontal seams, no mid-panel joins. Each panel connects to the next via a raised vertical seam that locks them together structurally and weatherproofs the connection completely.
The critical difference: all fastening hardware is hidden beneath these seams. Clips or brackets attach the panels to the roof deck at the seam line, never through the panel face. The result is a roof surface with zero exposed screws, zero exposed gaskets, and zero penetration points through which water can enter.
This is why standing seam metal roofing lasts 50–70+ years in Ontario's climate — the same conditions that destroy asphalt shingles and exposed-fastener metal in 12–18 years have no mechanism to damage it.
Concealed Fastener System
All hardware is hidden beneath the panel seam — no exposed screws, no rubber gaskets, no maintenance required at fastener points.
Thermal Floating
Hidden clips allow panels to expand and contract freely with temperature change, preventing panel distortion and fastener stress.
Class 4 Impact Resistance
The highest hail resistance rating available. Withstands a 2" steel ball dropped from 20 feet without cracking or penetrating.
Wind Rating to 250 km/h
The structural seam-lock engagement transfers wind loads across the entire roof plane — far exceeding any Ontario wind event on record.
50-Year Non-Prorated Warranty
Full manufacturer coverage for the entire 50-year term. Transferable to new owners. No declining coverage.
Ice Dam Immunity
Smooth metal surface sheds snow and melt naturally. No mechanism for ice dam formation or ice-forced water infiltration.
Where VAH Construction Installs Standing Seam.
Custom & Luxury Homes
Standing seam is the definitive choice for high-end residential construction. Clean profiles, architectural finishes, and permanent performance.
Roof Replacements
Replace your aging asphalt with a system that will outlast the building. Full tear-off, deck inspection, and premium metal installation.
Commercial Buildings
Low-slope and steep-slope commercial installations for warehouses, retail, industrial, and institutional properties.
Agricultural Structures
Long-span standing seam panels for barns, equipment storage, and farm buildings. Galvalume and painted systems.
Heritage Properties
Standing seam has a 150-year history in Ontario architecture. Ideal for heritage home renovations that require period-appropriate metal roofing.
Modern Architecture
Matte Black and Charcoal standing seam is the defining material of contemporary Ontario residential architecture.
Profiles & Colours.
Additional colours available. All finishes use PVDF paint systems for maximum colour retention and reflectivity.
Common Questions.
What is standing seam metal roofing?
Standing seam is a metal roofing system where panels run continuously from ridge to eave, with all fastening hardware concealed beneath raised vertical seams. There are no exposed screws, no penetrations through the panel face, and no points of water infiltration.
How long does standing seam metal roofing last in Ontario?
Standing seam metal roofing lasts 50–70+ years with minimal maintenance. VAH Construction's installations are backed by a 50-year non-prorated manufacturer warranty — full coverage throughout the entire term.
Is standing seam better than regular metal roofing?
Yes. Exposed fastener metal roofing requires rubber gaskets around every screw that harden and fail over 10–15 years. Standing seam eliminates all exposed fasteners — there is no maintenance required at the fastener level and no mechanism for water infiltration through fastener penetrations.
What does standing seam metal roofing cost in Ontario?
Costs vary by roof complexity, pitch, and square footage. VAH Construction provides free written, itemized quotes measured by satellite imagery. Contact us for a same-day quote with no obligation.
Does VAH Construction install standing seam on residential homes?
Yes. VAH Construction installs standing seam on residential homes, custom builds, and commercial properties throughout Niagara Region, Hamilton, Burlington, Oakville, and surrounding Southern Ontario.
What colours are available for standing seam metal roofing?
VAH Construction offers Matte Black, Charcoal Grey, Slate Grey, Forest Green, Burgundy, Terra Cotta, Galvalume (mill finish), and additional colours. PVDF paint coatings maintain colour and reflectivity for decades.
Ready for a Roof That Lasts 50 Years?
Get a free, written standing seam quote — measured by satellite, delivered same day. No obligation, no appointment needed.