Metal Roofing &
Fencing Insights.
Practical guides for Ontario homeowners on standing seam roofing, metal fencing, weather protection, and premium exterior upgrades.
18 articles in Metal Siding
Board-and-Batten Metal Siding: Batten Spacing and Proportion
Batten spacing is the single decision that makes or breaks a board-and-batten wall. How module width, batten height and layout planning change the way a metal exterior reads from the street.
Horizontal Lap Metal Siding: Profiles, Exposure and Coursing
Single 8, double 4, Dutch lap — horizontal metal siding profiles differ in more than looks. How exposure, the interlocking hem and joint layout affect how a wall performs and how it ages.
Corrugated and Ribbed Metal Siding: Stiffness, Fasteners and Fit
Corrugated and ribbed panels are the toughest and most forgiving metal siding you can buy — and the most exposed. How the corrugation adds stiffness, and how to detail an exposed-fastener wall properly.
Standing Seam as Wall Cladding: What Changes When It Leaves the Roof
Standing seam on a wall looks like standing seam on a roof and behaves very differently. Seam orientation, substrate flatness, clip movement and why oil canning is far more visible on a vertical surface.
Flush-Panel and Reveal-Joint Metal Siding for Modern Exteriors
Flat panels with tight joints or deliberate shadow gaps give the cleanest metal exterior available — and demand the most from the substrate, the barrier behind them and the installer.
Gauge, Panel Length and Oil Canning on Metal Walls
Oil canning is the most common complaint about metal siding and the least understood. What actually causes it, why walls show it more than roofs, and which specification choices genuinely reduce it.
Metal Siding vs Vinyl Siding: An Honest Comparison
Vinyl is inexpensive, light and easy to repair. Metal is stiffer, holds colour better and behaves better in fire. Both have real weaknesses. A straight comparison for Ontario homeowners.
Metal Siding vs Fibre Cement: Weight, Water and Maintenance
Fibre cement does not dent and takes paint beautifully. Metal does not absorb water and never needs repainting. The real differences are in weight, cutting, joints and how each one handles moisture.
Metal Siding vs Wood and Engineered Wood Siding
Cedar looks like nothing else and asks for a maintenance commitment in return. Engineered wood is more stable but moisture-sensitive at the edges. How metal compares to both, without the sales pitch.
Mixing Metal Siding with Stone, Brick or Wood Accents
Material transitions are where exteriors succeed or look thrown together. How to proportion a mixed-material elevation and how to flash the joint between metal and masonry so it drains.
Rainscreen Assemblies and Furring Behind Metal Siding
Metal cannot dry outward. That single fact is why the cavity behind metal siding matters more than behind any other cladding — and why furring depth, orientation and venting are engineering decisions.
Weather-Resistive Barriers Behind Metal Cladding
Behind an impermeable cladding, the barrier is the wall's real defence and its drying path is one-directional. How to choose and install a WRB that suits a metal exterior in an Ontario climate.
Fastening Metal Siding for Thermal Movement
A metal panel grows and shrinks every day of its life. Slotted holes, fixed points, fastener selection and galvanic compatibility are what let it do that without buckling, squealing or corroding.
Window and Door Flashing Details in a Metal Siding Wall
Openings are where walls leak. Sill pans, jamb flashing, head flashing with end dams and a drip — the sequence and the reasoning behind each layer in a metal-clad wall.
Inside and Outside Corner Treatments for Metal Siding
Corners show every error in a wall — out of plumb framing, missing furring, panels pinned at both ends. The corner options available in metal, and what each one demands behind it.
Installing Metal Siding Over Existing Cladding
Going over old siding saves tear-off and disposal, and buys you a set of problems: flatness, fastener reach, buried moisture damage and every detail at the openings getting deeper.
Metal Soffit Systems: Perforated vs Solid and Attic Ventilation
Soffit is not just trim — it is the intake half of the attic ventilation system. How perforation, net free area and baffles determine whether the attic actually breathes.
Metal Fascia and Drip Edge: How the Roof Edge Comes Together
The eave is where roofing, fascia, drip edge and eavestrough all meet in about 150 millimetres. Get the layering wrong and water runs behind the trough, into the fascia and down the wall.